LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Fuel Injection System (H4DOTC)) >> Manifold Absolute Pressure Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting/Connecting Battery Ground Cable
    G06336085Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector (A) from manifold absolute pressure sensor, and remove the filter assembly (B) from intake manifold.
  4. Remove the manifold absolute pressure sensor from the solenoid valve bracket.
    Fig 2: Identifying Manifold Absolute Pressure Sensor Connector And Filter Assembly
    G08539883Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals