| Drive pinion bearing preload (for new bearing) |
Measured with spring measurement (measured at companion flange bolt hole) N (kgf, lbf) |
T-type |
18.1 - 38.8 (1.8 - 4.0, 4.1 - 8.7) |
| VA1, VA2-type |
12.7 - 32.2 (1.3 - 3.3, 2.9 - 7.2) |
| Measured with torque wrench N.m (kgf-m, ft-lb) |
T-type |
0.69 - 1.47 (0.07 - 0.15, 0.51 - 1.08) |
| VA1, VA2-type |
0.48 - 1.22 (0.05 - 0.12, 0.35 - 0.90) |
| Side gear backlash |
mm (in) |
T-type |
0.10 - 0.20 (0.004 - 0.008) |
| VA1-type |
0.05 - 0.15 (0.002 - 0.006) |
| VA2-type |
0.13 - 0.18 (0.005 - 0.007) |
| Hypoid driven gear backlash |
mm (in) |
T-type |
0.10 - 0.20 (0.004 - 0.008) |
| VA1, VA2-type |
0.10 - 0.15 (0.004 - 0.006) |
| Hypoid driven gear runout on its back surface |
mm (in) |
T-type |
0.05 (0.002) |
| Total preload (measured from the companion flange bolt hole) |
N (kgf, lbf) |
T-type |
20.7 - 54.4 (2.1 - 5.5, 4.7 - 12.2) |
| Companion flange mating surface runout |
mm (in) |
0.08 (0.003) |
| Companion flange runout on its inner side |
mm (in) |
0.08 (0.003) |