LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Body Integrated Unit >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Body Integrated Unit: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Refer to REMOVAL .
  3. Remove the body integrated unit.
    CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
    1. Remove the harness clip and connector.
    2. Remove the bolts, and remove the body integrated unit.
      Fig 1: Locating Body Integrated Unit Connector And Bolts
      G06653942Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals