Spot Map Light Switch
- Remove the overhead console assembly.
- Measure the resistance between spot map light switch terminals.
Preparation tool:
Circuit tester
- Models without EyeSight
Terminal No. Inspection conditions Standard Connection diagram - Switch OFF 1 MΩ or more - 6 - 5 Switch ON Less than 1 Ω 6 - 7 Switch door Less than 1 Ω - Models with EyeSight
Terminal No. Inspection conditions Standard Connection diagram - Switch OFF 1 MΩ or more - 13 - 12 Switch ON Less than 1 Ω 13 - 14 Switch door Less than 1 Ω
- Models without EyeSight
- Replace the overhead console assembly or stereo camera cover assembly if the inspection result is not within the standard value.