LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Legacy Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Combination Switch (Light) >> Inspection >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Combination Switch (Light): Inspection: Notes

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the combination switch connector.
  2. Check the resistance between combination switch terminals.
    Fig 1: Identifying Combination Switch Connector And Terminals
    G05022458Courtesy of SUBARU OF AMERICA, INC.
  3. Replace the combination switch (light) if the inspection result of each switch is not within the standard value.
scientia non olet · About LEMON Manuals