September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Cruise Control Command Switch: Inspection
- Disconnect the cruise control command switch connector.
- Check the resistance between cruise control command switch terminals.
Courtesy of SUBARU OF AMERICA, INC.
| Switch |
Position |
Terminal No. |
Standard |
| CANCEL SET/COAST RESUME/ACCEL |
All OFF |
7 and 6 |
Approx. 4 kΩ |
| CANCEL |
ON |
7 and 6 |
Less than 1 Ω |
| SET/COAST |
ON |
7 and 6 |
Approx. 250 Ω |
| RESUME/ACCEL |
ON |
7 and 6 |
Approx. 1500 Ω |
| MAIN (CRUISE) |
OFF |
8 and 6 |
1 MΩ or more |
| ON |
8 and 6 |
Less than 1 Ω |
- Replace the cruise control command switch if the inspection result is not within the standard value.