October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
SUBARU Select Monitor (OBD Mode)
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Engine Control System}.
- Click the [OK] button after the information of engine type has been displayed.
- On «Engine Diagnosis» display, select {OBD System}.
- On «OBD Menu» display, select {Clear Diagnostic Code(s)}.
- When the "Clear Diagnostic Code?" is shown on the screen, click the [Yes] button.
- When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to
"PC application help for Subaru Select Monitor".