LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Glass & Power Window System) >> Relay >> Unit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Unit Inspection

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspection of defogger relay
    1. Measure the resistance between connector terminals as shown below.

      Resistance

      STANDARD VALUE SPECIFICATION

      Inspection terminals Inspection conditions Standard value
      3 - 5 When battery voltage is not applied between terminals 1 - 2. 10 kΩ or more
      When battery voltage is applied between terminals 1 - 2. Less than 1 Ω
      G12594983Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals