LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO -3.6L DOHC) >> Diagnostics for Engine Starting Failure >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diagnostics for Engine Starting Failure: Procedure

  1. Check of the fuel amount

  2. Inspection of starter motor circuit. Refer to STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure.

  3. Inspection of ECM power supply and ground line. Refer to CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure.

  4. Inspection of ignition control system. Refer to IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure.

  5. Inspection of fuel pump circuit. Refer to FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure.

  6. Inspection of fuel injector circuit. Refer to FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure.