LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Premium, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission And Differential >> Front Differential Assembly >> Assembly >> Side Retainer
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Side Retainer

  1. Using the ST, install the differential side retainer oil seal by lightly tapping with a plastic hammer.
    NOTE:
    • Use a new oil seal.
    • Apply transmission gear oil to the oil seal lips, and install the oil seal while being careful not to deform the lip.
    • Check the identification marks (L, R), attach the oil seal RH and LH.

    ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER

    Fig 1: Identifying Differential Side Oil Seal Installer
    G05003119Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-ring.
    NOTE:
    • Use new O-rings.
    • Apply gear oil to O-ring.
    • Do not stretch or damage the O-ring.
      Fig 2: Identifying O-Ring
      G05003111Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals