Antitheft Motion Sensor: Description and Operation

Impact Sensor

OPERATION

IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
1. Prepare the Subaru Select Monitor kit.
2. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
3. On [System Selection Menu] display, select {Integ. unit mode}.
4. Select {ECM customizing}.
5. Perform impact sensor ON/OFF setting.
- Installed: ON
- Removed: OFF

6. Perform impact sensor ON/OFF setting.
- Installed: ON
- Removed: OFF

7. Turn the ignition switch to OFF and remove the Subaru Select Monitor.