LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Rear Sub Frame >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Sub Frame: Installation

CAUTION:
  • Be sure to use a new self-locking nut.
  • Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
  1. Check the removed parts for wear, damage and crack, and repair or replace them if faulty.
  2. Install each part in the reverse order of removal.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description" for the tightening torque. Refer to ,  COMPONENT  , General Description. 

  3. Bleed air from brake system.
  4. Inspect the wheel alignment and adjust if necessary.
scientia non olet · About LEMON Manuals