Rear Bushing

1. Put an alignment mark on the front arm based on the center of rear bushing recess portion.
   CAUTION: Always put an alignment mark for aligning the position on bushing installation.
   Fig 1: Identifying Alignment Mark On Front Arm

   Courtesy of SUBARU OF AMERICA, INC.
2. Using the ST and a press, remove the rear bushing.

PREPARATION TOOL: 

ST1: REMOVER (20299AG000) 

ST2: BASE (20299AG010) 

Fig 2: Removing Rear Bushing Using ST

Courtesy of SUBARU OF AMERICA, INC.