LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Vehicle Dynamics Control (VDC)) >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

VDC Control Module and Hydraulic Control Unit (VDCCM&H/U): Installation

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the VDCCM&H/U to the bracket.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.53 ft-lb) 

  2. Install the VDCCM&H/U bracket.

    Tightening torque: 

    33 N.m (3.3 kgf-m, 24.3 ft-lb) 

  3. Connect the brake pipes to their correct VDCCM&H/U positions.

    Tightening torque: 

    Refer to  FRONT BRAKE PIPES AND HOSES  . 

  4. Connect the VDCCM&H/U connector.
    NOTE:
    • Be sure to remove all foreign matter from inside the connector before connecting.
    • Make sure the VDCCM&H/U connector is securely locked.
  5. Bleed air from the brake system.
scientia non olet · About LEMON Manuals