LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Transmitter >> Inspection >> Keyless Transmitter Battery
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Keyless Transmitter Battery

  1. Check the keyless transmitter battery voltage.

    Preparation tool: Circuit tester 

    NOTE: Complete the measurement within 5 seconds because the battery discharges during measurement.
    Fig 1: Checking Keyless Transmitter Battery Voltage
    G05337080Courtesy of SUBARU OF AMERICA, INC.
    Battery terminal Inspection Conditions Specification
    (+) - (-) Connect resistor (A) 47 Ω 2.5 - 3.0 V
  2. Replace the battery if the inspection result is not within the standard value. (Use CR1620 or equivalent.)
scientia non olet · About LEMON Manuals