LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Door Lock Control System >> Inspection >> Check Power Supply And Ground Circuit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Check Power Supply And Ground Circuit

Step Check Yes No
1 CHECK POWER SUPPLY. 
  1. Disconnect the connector of body integrated unit.
  2. Measure the voltage between body integrated unit connector and chassis ground.

    Connector & terminal 

    (i84) No. 6 (+) - Chassis ground (-): 

    (i171) No. 1 (+) - Chassis ground (-): 

    (B281) No. 7 (+) - Chassis ground (-): 

 Is the voltage 10 V or more? Go to step 2.  Check the harness for open or short circuit between body integrated unit and fuse.
2 CHECK GROUND CIRCUIT. 
Measure the resistance between body integrated unit connector and chassis ground.
Connector & terminal 
(i84) No. 1 - Chassis ground: 
(i171) No. 29 - Chassis ground: 
(B280) No. 1 - Chassis ground: 
(B281) No. 31 - Chassis ground: 		 Is the resistance less than 10 Ω? The power supply and ground circuit are OK. Repair or replace the harness.
scientia non olet · About LEMON Manuals