LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Drivetrain System >> Rear Hub Unit Bearing >> Disassembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Hub Unit Bearing: Disassembly

Using the ST or a hydraulic press, push out the hub bolt (b) from the rear hub unit bearing (a).

CAUTION:
  • Be careful not to hammer the hub bolts. This may deform the hub.
  • Do not reuse the hub bolt.

PREPARATION TOOL: 

ST: HUB STAND (28399AG000) 

Fig 1: Pushing Hub Bolt From Rear Hub Unit Bearing
G07914144Courtesy of SUBARU OF AMERICA, INC.
NOTE: Since the hub unit bearing can not be disassembled, only hub bolts can be removed.
scientia non olet · About LEMON Manuals