Differential Case Assembly

Remove the taper roller bearing using the ST.
ST 498077000 REMOVER

Fig 1: Identifying Taper Roller Bearing With Remover
Courtesy of SUBARU OF AMERICA, INC.
Remove the hypoid driven gear mounting bolt using the ST.
ST 18270KA020 SOCKET (E20)

Fig 2: Identifying Hypoid Driven Gear Mounting Bolt With Socket
Courtesy of SUBARU OF AMERICA, INC.
Remove the differential case (LH).

Fig 3: Identifying Differential Case (LH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the differential bevel gear and washer from differential case.

Fig 4: Identifying Differential Bevel Gear And Washer
Courtesy of SUBARU OF AMERICA, INC.
Remove the straight pin.

Fig 5: Locating Straight Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the pinion shaft, then remove the differential bevel gear, washer and differential bevel pinion.

Fig 6: Identifying Pinion Shaft, Differential Bevel Gear And Differential Bevel Pinion
Courtesy of SUBARU OF AMERICA, INC.