LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback R Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Oil Charge Pipe >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Charge Pipe: Installation

  1. Install the oil charge pipe.
    NOTE: Use new gaskets and O-rings.

    Tightening torque: 

    38 N.m (3.9 kgf-m, 28.0 ft-lb) 

    Fig 1: Identifying ATF Level Gauge And Oil Charge Pipe
    G07914806Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the connector to the turbine speed sensor 1.
  3. Install the front exhaust pipe. Refer to FRONT EXHAUST PIPE .
  4. Install the under cover. Refer to FRONT UNDER COVER .
  5. Lower the vehicle.
  6. Connect the ground cable to battery.
scientia non olet · About LEMON Manuals