Select Lever: Disassembly

Remove the gasket and plate COMPL.

Fig 1: Identifying Gasket And Plate COMPL
Courtesy of SUBARU OF AMERICA, INC.
Insert a flat tip screwdriver with a thin tip under the connector and disconnect each connector from the plate COMPL.

Fig 2: Identifying Position For Inserting Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
Remove the spacer bolt and remove the plate guide COMPL.

Fig 3: Identifying Spacer Bolt And Plate Guide
Courtesy of SUBARU OF AMERICA, INC.
Remove the shift lock clamp, spring A, select lever rod, lock plate cushion, and bushing.

Fig 4: Identifying Shift Lock Clamp, Spring A, Select Lever Rod And Lock Plate Cushion
Courtesy of SUBARU OF AMERICA, INC.
Remove the bracket.

Fig 5: Identifying Shift Lever Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove the detent spring.

Fig 6: Identifying Detent Spring
Courtesy of SUBARU OF AMERICA, INC.
Remove the shift lock solenoid unit.

Fig 7: Illustrating Removing Shift Lock Solenoid Unit
Courtesy of SUBARU OF AMERICA, INC.
Raise the claw of connector.

Fig 8: Raising Claw Of Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the terminals of the SPORT mode switch, "P" range switch, and shift lock solenoid from the connector, using a flat tip screwdriver with a thin tip.

Fig 9: Disconnecting Terminals Of SPORT Mode Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet.

Fig 10: Identifying Grommet
Courtesy of SUBARU OF AMERICA, INC.
Pull out the spring pin.

Fig 11: Locating Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Pull out the arm assembly, remove select lever COMPL, and remove bracket arm detent and bushing.

Fig 12: Identifying Select Lever COMPL, Arm Assembly And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the rod detent and spring detent from the bracket arm detent.

Fig 13: Identifying Rod Detent And Spring Detent
Courtesy of SUBARU OF AMERICA, INC.