When Using Piano Wire
CAUTION:
- Do not tightly pull the piano wire against the windshield glass edge.
- Apply protective tape, etc., and be careful not to damage interior and exterior parts.
- Do not cross piano wires. Otherwise they may be cut.
- Remove the front pillar trim of the passenger's side, and disconnect the wiper deicer connector. (Model with wiper deicer)
- Remove the cowl panel. Refer to REMOVAL , Cowl Panel.
- Remove the glass molding.
- Tape the body side of the circumference of windshield glass for protection.
- Using a drill or razor blade, make a hole in the adhesive part.
- Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
- Pull the wire ends alternately to cut off the adhesive part.