SI-Drive (Subaru Intelligent Drive) Steering Wheel Mounted Switch

SI-DRIVE (SUBARU Intelligent Drive) S# Switch

REMOVAL

1. Disconnect the ground cable from battery.






2. Remove the airbag module.

WARNING: Always refer to "Airbag System" before performing service on the airbag modules.

3. Remove the screws which secure the SI-DRIVE S# switch to the steering wheel, and remove the SI-DRIVE S# switch.






4. Disconnect the connectors from the SI-DRIVE S# switch.

INSTALLATION

Install in the reverse order of removal.

INSPECTION

Measure the resistance between SI-DRIVE S# switch terminals.