LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

AT Shift Lock Solenoid and "P" Range Switch: Inspection

DIAGNOSTIC PROCEDURE FOR SYMPTOM

Step Check Yes No
1 CHECK SHIFT LOCK SOLENOID  .
Measure the resistance of shift lock solenoid connector terminals.
Terminals 
No. 4 - No. 3: 		 Is the resistance between 19.8 - 24.2 Ω? Go to step 2  . Replace the shift lock solenoid.
2 CHECK SHIFT LOCK SOLENOID  .
Connect the battery to shift lock solenoid connector terminal, and then operate the solenoid.
Terminals 
No.3 (+) - No.4 (-): 		 Does the shift lock solenoid operate normally? Go to step 3  . Replace the shift lock solenoid.
3 CHECK "P" RANGE SWITCH  .
  1. Move the select lever to "P" range.
  2. Measure the resistance between "P" range switch connector terminals.

    Terminals 

    No. 1 - No. 2: 

 Is the resistance less than 1 Ω? Go to step 4  . Replace the "P" range switch.
4 CHECK "P" RANGE SWITCH  .
  1. Set the select lever to a range other than the "P" range.
  2. Measure the resistance between "P" range switch connector terminals.

    Terminals 

    No. 1 - No. 2: 

 Is the resistance more than 1 MΩ? Normal Replace the "P" range switch.
scientia non olet · About LEMON Manuals