LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Transmission Control Module (TCM) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Transmission Control Module (TCM): Installation

  1. Install the TCM.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

    Fig 1: Identifying Transmission Control Module And Steering Column
    G05671013Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the connector to the TCM.
  3. Install in the reverse order of removal.
  4. Perform Clear Memory 2 operation. <Ref. to CLEAR MEMORY MODE , OPERATION, Subaru Select Monitor.>
  5. Execute the learning control promotion. <Ref. to GENERAL DESCRIPTION , Learning Control.>
  6. Perform the inspection at the end of repair work, and make sure there is no faulty as below;
    • Excessive shift shock
    • Oil leakage from the transmission body, etc.
    • Occurrence of noise caused by interference etc.
scientia non olet · About LEMON Manuals