LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Sub Frame >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Sub Frame: Installation

NOTE:
  • Be sure to use a new self-locking nut.
  • Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
  1. Install in the reverse order of removal.

    Tightening torque: Refer to "COMPONENT" of "General Description" for the tightening torque.  < Ref. to COMPONENT , General Description . >

  2. Bleed air from brake system.
  3. Inspect the wheel alignment and adjust if necessary.
scientia non olet · About LEMON Manuals