October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Lateral Link: Installation

NOTE:

Be sure to use a new self-locking nut.
Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.

Install in the reverse order of removal.
Tightening torque:

Front lateral link to Sub frame

120 N.m (12.2 kgf-m, 89 ft-lb)

Front lateral link to Rear axle housing.

27 N.m (2.8 kgf-m, 20 ft-lb)
Inspect the wheel alignment and adjust if necessary.