LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Universal Joint >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Universal Joint: Installation

  1. Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.
  2. Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
  3. Tighten the bolt.

    Tightening torque: 

    24 N.m (2.4 kgf-m, 17.4 ft-lb) 

    CAUTION: Excessively large tightening torque of universal joint bolts may lead to heavy steering wheel operation.

    Clearance between coupling of universal joint to AT level gauge: 

    10 mm (0.39 in) or more 

  4. Align the center position of the roll connector. <Ref. to ADJUSTMENT , Roll Connector.>
  5. Install the steering wheel. <Ref. to INSTALLATION , Steering Wheel.>
scientia non olet · About LEMON Manuals