Clear Memory Mode

Clear the DTC stored in the airbag control module after repairing the airbag system and occupant detection system. (After the breakdown is recovered, the breakdown code for completed recoveries are read out when the next breakdown occurs if the memory clear work is not performed.)

1. On the « Main Menu » display screen, select the {Each System Check}.
2. On the « System Selection Menu », select {Airbag System}.
3. Select the {Clear Memory} in « Airbag System ».
4. When the "Clear Memory?" is shown on the screen, press [OK].
5. When "Done" is displayed, end the Subaru Select Monitor.
   NOTE: For details concerning the operation procedure, refer to the "PC application for Subaru Select Monitor".