LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> Drive Cycle F
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Drive Cycle F

  1. Check that the engine coolant temperature at engine start is less than 30°C (86°F).
  2. Start the engine, and warm it up until engine coolant temperature increases over 95°C (203°F).
  3. Idle the engine for more than 10 minutes in the condition of step  2.
    NOTE: Do not disconnect the terminal of battery during diagnosis. (Data will be cleared by disconnecting the battery terminals.)

This drive cycle covers air temperature sensor.