LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

VDC Control Module and Hydraulic Control Unit (VDCCM&H/U): Installation

  1. Install the VDCCM&H/U bracket.

    Tightening torque: 

    33 N.m (3.3 kgf-m, 24 ft-lb) 

  2. Install the VDCCM&H/U to the bracket.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

    CAUTION: Attach so that the protrusion of the stud bolt is at the position shown in the figure.
    Fig 1: Identifying Stud Bolt And Bracket
    G05664698Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the brake pipes to their correct VDCCM&H/U positions.

    Tightening torque: 

    < Ref. to FRONT BRAKE PIPES AND HOSE , COMPONENT, General Description . >

  4. Connect the VDCCM&H/U connector.
    NOTE:
    • Be sure to remove all foreign matter from inside the connector before connecting.
    • Make sure the VDCCM&H/U connector is securely locked.
  5. Bleed air from the brake system.
scientia non olet · About LEMON Manuals