LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Combination Base Switch Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Combination Base Switch Assembly: Removal

  1. Remove the driver's airbag module. <Ref. to REMOVAL , Driver's Airbag Module.>
  2. Remove the steering wheel. <Ref. to REMOVAL , Steering Wheel.>
  3. Remove the screws and remove the steering column lower cover.
    Fig 1: Identifying Steering Column Covers Screws (Upper And Lower)
    G05022834Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination switch. <Ref. to REMOVAL , Combination Switch (Light).> <Ref. to REMOVAL , Combination Switch (Wiper).>
  5. Remove the four screws and remove the roll connector.
  6. Remove the three screws.
    Fig 2: Locating Roll Connector Screws
    G05004089Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector and remove the combination base switch assembly.
scientia non olet · About LEMON Manuals