DTC P0125 Insufficient Coolant Temperature For Closed Loop Fuel Control: Trouble Symptom
Engine does not return to idle.
CAUTION:
After repairing or replacing the defective part, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode .> and Inspection Mode <Ref. to
PROCEDURE , Inspection Mode .>.
DIAGNOSTIC PROCEDURE CHART
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK TIRE SIZE. | Is the tire size as specified? and the same size as other three wheels? | Go to step 2. | Replace the tire. |
| 2 CHECK ENGINE COOLANT. Check the following items:
|
Is the engine coolant normal? | Go to step 3. | Fill or replace the engine coolant. <Ref. to REPLACEMENT , Engine Coolant .> |
| 3 CHECK THERMOSTAT. | Does the thermostat remain opened? | Replace the thermostat. <Ref. to THERMOSTAT . > | Replace the engine coolant temperature sensor. <Ref. to ENGINE COOLANT TEMPERATURE SENSOR . > |