September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Preparation For Drive Cycle
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 l
(5.3 - 10.6 US gal, 4.4 - 8.8 lmp gal)].
- After performing the diagnostics and clearing the memory, check for any remaining unresolved trouble data. <Ref. to
CLEAR MEMORY MODE . >
- Disconnect the test mode connector.
NOTE:
- Perform the diagnosis after warming up the engine except when the engine coolant temperature at starting is specified.
- Perform the diagnosis twice if the DTC marked with *. After completing the first diagnosis, stop the engine and perform second diagnosis in same condition.