A/T Fluid Replacement

REPLACEMENT
1) Lift up the vehicle.
2) Remove the drain plug (ATF) and completely drain the ATF.

CAUTION: After running the engine or after idling for a long time, the ATF is hot. Be careful not to burn yourself.

3) Check the condition of ATF.
4) Perform replacement with a new gasket, and tighten the drain plug (ATF).





5) Lower the vehicle.
6) Pour ATF from the oil charge pipe.
Recommended fluid: Ref. to FLUID, RECOMMENDED MATERIALS, Recommended Materials.
Capacity: Refill with the same amount of ATF drained from the drain plug hole.
Capacity when transmission is overhauled: 9.3 - 9.6 l (9.8 - 10.1 US qt, 8.2 - 8.4 Imp qt)
7) Bleed the air of control valve.
8) Check the level and leaks of ATF.