Oil Pump Cover: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
- Pull out the torque converter assembly. < Ref. to REMOVAL , Torque Converter Assembly. >
- Remove the transmission harness connector from stay.
- Remove the oil charge pipe. < Ref. to REMOVAL , Oil Charge Pipe. >
- Remove the ATF inlet and outlet pipes. < Ref. to REMOVAL , ATF Cooler Pipe and Hose. >
- Separate the converter case and transmission case. < Ref. to REMOVAL , Converter Case. >
- Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.