Oil Flow Control Solenoid Valve: Assembly

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil flow control solenoid valve.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)
Apply liquid gasket to the two bolts which secure the oil return cover.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent
Attach the oil return cover and gasket.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)

NOTE: Use a new gasket.

Fig 1: Identifying Oil Flow Control Solenoid Valve, Oil Return Cover And Camshaft Cap
Courtesy of SUBARU OF AMERICA, INC.