LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Tire Pressure Monitoring System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clear Memory

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu», select {2. Each System Check}.
  2. On the «System Selection Menu», select {Tire Pressure Monitor}.
  3. After the {Tire Pressure Monitor} is displayed, select [OK].
  4. On the «Tire Pressure Monitor Diagnosis», select {Clear Memory}.
  5. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE: For details concerning the operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals