LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Seat System - Seats) >> Power Seat System >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Seat System: Installation

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE:
  • For the memory-equipped seat, always perform the initialize operation after the installation. <Ref. to ADJUSTMENT , Power Seat System .>
  • Check the following items after replacing the memory-equipped seat or the memory module.
    • AT model
      1. Memory feature is restored after turning the ignition switch to ON and shifting to P range.
      2. Memory feature is not restored after turning the ignition switch to ON and shifting to other than P range.
    • MT model
      1. Memory feature is restored after turning ignition switch to ON and pulling parking brake lever.
      2. Memory feature is not restored after turning the ignition switch to ON and pushing parking brake lever.
scientia non olet · About LEMON Manuals