Front Seat: Installation

Install in the reverse order of removal.

NOTE: Tighten the slide rail installing bolt gradually in several steps to the specified torque in the order as shown in the figure.

Fig 1: Identifying Tightening Sequence Of Slide Rail Installing Bolt

Courtesy of SUBARU OF AMERICA, INC.

CAUTION: After installing the driver's seat, use the Subaru Select Monitor to confirm that the seat position sensor LH is operating properly. <Ref. to DISPLAY OF STATUS INFORMATION , OPERATION, Subaru Select Monitor.>

Tightening torque:

Refer to "COMPONENT" of "General Description". <Ref. to COMPONENT , General Description.>