Main Switch
- Remove the main switch. <Ref. to REMOVAL , POWER WINDOW CONTROL SWITCH.>
- Turn the window lock switch to UNLOCK.
- Connect the battery and the main switch as shown in the following figure.
- Measure the main switch resistance.RESISTANCE SPECIFICATION CHART
Switch position Terminal No. Standard Driver's side UP 13 and 2, 1 and 5 Less than 1 Ω OFF 1 and 5 2 and 5 Less than 1 Ω DOWN 13 and 1,2 and 5 Less than 1 Ω AUTO DOWN 13 and 1, 2 and 5 Less than 1 Ω Passenger's side UP 13 and 6, 7 and 5 Less than 1 Ω OFF 5 and 6 5 and 7 Less than 1 Ω DOWN 13 and 7, 6 and 5 Less than 1 Ω Rear LH UP 11 and 13, 10 and 5 Less than 1 Ω OFF 5 and 11 5 and 10 Less than 1 Ω DOWN 13 and 11, 10 and 5 Less than 1 Ω Rear RH UP 13 and 16, 15 and 5 Less than 1 Ω OFF 5 and 15 5 and 16 Less than 1 Ω DOWN 13 and 15,16 and 5 Less than 1 Ω - Replace the main switch if faulty.