LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (H6DO)) >> Oil Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Removing Collector Cover
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake chamber. <Ref. to REMOVAL , Air Intake Chamber .>
  4. Disconnect the connector from the oil temperature sensor.
  5. Remove the oil temperature sensor.
    Fig 2: Locating Oil Temperature Sensor
    G05018469Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals