LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) >> ABS Control Module and Hydraulic Control Unit (ABSCM&H/U) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ABS Control Module and Hydraulic Control Unit (ABSCM&H/U): Installation

  1. Install the ABSCM&H/U bracket.

    Tightening torque: 

    33 N.m (3.3 kgf-m, 24 ft-lb) 

  2. Install the ABSCM&H/U by aligning the damper groove of the ABSCM&H/U to the bracket side claw.
    NOTE: Check the identification marks of the ABSCM&H/U.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

    Fig 1: Locating ABSCM&H/U Nuts
    G05020203Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the brake pipes to their correct ABSCM&H/U positions.

    Tightening torque: 

    15 N.m (1.5 kgf-m, 10.8 ft-lb) 

  4. Using a harness clip, secure the ABSCM&H/U harness to the bracket.
  5. Connect the connector to the ABSCM&H/U.
    NOTE:
    • Be sure to remove all foreign matter from inside the connector before connecting.
    • Make sure the ABSCU&H/U connector is securely locked.
  6. Bleed air from the brake system.
scientia non olet · About LEMON Manuals