September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Crankshaft Position Sensor: Removal
- Remove the collector cover.
- Disconnect the ground cable from battery.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the generator. <Ref. to
REMOVAL
, Generator .>
- Remove the bolt which installs crankshaft position sensor to cylinder block.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the crankshaft position sensor, and then disconnect the connector from it.
Courtesy of SUBARU OF AMERICA, INC.