September 30: LEMON manuals is back up on a temporary server! Slowness is possible

SUBARU Select Monitor (OBD Mode)

On the «Main Menu» display screen, select {Each System Check}.
On the «System Selection Menu» display screen, select {Engine Control System}.
Select the [OK] after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select {OBD System}.
On the «OBD Menu» display screen, select {DTC Display}.
Make sure DTC is shown on the screen.

NOTE:

For detailed operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".
For details concerning DTC, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .