LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Impreza WRX STi >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Immobilizer Control Module >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Immobilizer Control Module: Removal

NOTE:
  • On models equipped with an immobilizer, prepare all registered immobilizer keys.
  • When replacing the immobilizer control module, perform immobilizer registration. At this time, a new immobilizer key is required. For detailed work procedures, refer to the " REGISTRATION MANUAL FOR IMMOBILIZER ".
  • When not replacing the immobilizer control module, it is not necessary to re-register the existing keys.
  1. Disconnect the ground cable from the battery.
  2. Remove the instrument panel lower cover. <Ref. to REMOVAL , Instrument Panel Assembly .>
  3. Disconnect the connector from immobilizer control module.
  4. Remove the immobilizer control module.
    5. Fig 1: Locating Immobilizer Control Unit
    G05004402Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals