Clear Memory Mode
WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Clear the DTC stored in the occupant detection system module after repairing occupant detection system.
NOTE:
After the breakdown is recovered, the breakdown code for completed recoveries are read out when the next breakdown occurs if the memory clear work is not performed.
- Select the {Occupant Detection System} on the main menu, and press the [YES] key.
- On the «Occupant Detection System» display screen, select {Clear Memory} and press the [YES] key.
- When the {Done} is shown on the display, DTCs will be cleared.
NOTE:
When the {Cannot erase the DTC stored, perform the diagnosis according to trouble symptom} is shown, read the DTC and perform the diagnosis according to DTC. <Ref. to
DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . >