October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
How To Use SUBARU Select Monitor
- Prepare the Subaru Select Monitor kit. <Ref. to
PREPARATION TOOL , General Description.>
- Connect the diagnosis cable to the Subaru Select Monitor.
- Connect the Subaru Select Monitor to the data link connector at the lower portion of instrument panel (on the driver's side).
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
Do not connect the scan tools except for Subaru Select Monitor and general scan tool.
- Turn the ignition switch to ON (engine OFF) and run the Subaru Select Monitor.
- Using the Subaru Select Monitor, call up DTC and data, then record them.