October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Drive Cycle F
- Check that the engine coolant temperature at engine start is 30°C (86°F) or less.
- Start the engine, and warm it up until engine coolant temperature increases over 95°C (203°F).
- After the engine has reached the state of procedure 2), idle the engine for 10 minutes or more.
NOTE:
Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DTC CHART
| DTC |
Item |
On condition |
| P0111 |
Intake Air Temperature Circuit Range/Performance |
- |