October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
SUBARU Select Monitor (Normal Mode)
- On the «Main Menu» display screen, select the {Each System Check}.
- On the «System Selection Menu» display screen, select the {Engine Control System}.
- Select the [OK] after the information of engine type has been displayed.
- On the «Engine Diagnosis» display screen, select the {Clear Memory}.
- When the "Done" and "Turn Ignition Switch OFF" are shown on the display screen, turn the ignition switch to OFF and then close the Subaru Select Monitor.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Because of this, start the engine 10 seconds or more after the ignition switch is turned ON.
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".