Front Sub-Sensor

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

How to disconnect:
1. Holding outer part (A), pull it in the direction of the arrow.
  CAUTION: When pulling, be sure to hold onto the connector and not the wire.
  
  Fig 1: Disconnecting Front Sub-Sensor
  Courtesy of SUBARU OF AMERICA, INC.
How to connect:
Holding the connector, and push it in carefully until a connecting sound is heard.
CAUTION:
- Outer (A) moves back, and so do not put your hand on the outer part.
- Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
Fig 2: Connecting Front Sub-Sensor
Courtesy of SUBARU OF AMERICA, INC.